Mitutoyo Linear Gage LGF-Z with Origin Point Mark Series 542 – 542-164
Range: 0.4″ / 10mm Resolution: 0.001mm
Optional Accessories:
Air drive unit: For 10mm range models: No.02ADE230 For 25mm range models: No.02ADE250 For 50mm range models: No.02ADE270 * Required air pressure: 0.2 to 0.4MPa * Spindle extends when air is supplied.
Rubber boot (spare): For 10mm range models: No.238772 For 25mm range models: No.962504 For 50mm range models: No.962505
Thrust stem set: For 10mm range models: No.02ADB680 Thrust stem: No.02ADB681 Clamp nut: No.02ADB682 For 25/50mm range models: No.02ADN370 Thrust stem: No.02ADN371 Clamp nut: No.02ADB692 * External dimensions are described in the dimensional drawing of the product. * Thrust stem set is a combination of thrust stem and a clamp nut. A special spanner is required for tightening. If using multiple gages, a thrust stem set for each gage and one special spanner are required.
Spanner Wrench: For 10mm range models: No.02ADB683 For 25/50mm range models: No.02ADB693
Extension Cables:
Extension cable (5m): 02ADF260
Extension cable (10m): 02ADF280
Extension cable (20m): 02ADF300
Applicable Counters:
EH counter – EH-102Z (542-073A)
EB counter – EB-11Z (542-094-2)
EG counter – EG-101Z (542-017)
EV counter – EV-16Z (542-067)
Specifications:
Order No
542-164
Measuring Range
0.4″ / 10mm
Resolution
0.001mm
Measuring accuracy (20°C)
(1.5+L/50)
Quantizing error
±1 count
Measuring Force-Contact Point
upwards – 1.0N or lesshorizontal – 1.1N or lessdownwards – 1.2N or less
Position detection method
Photoelectric linear encoder
Response speed*1
1500mm/s
Output signal
90° phase difference, differential square wave (RS-422A equivalent), minimum edge intervals: 250ns for 0.5µm model, 500ns for 1µm model
Mass
Approx. 260g
Dust/water resistance*2
Equivalent to IP66 (only gage head)
Contact point
ø3mm carbide-tipped (fixing screw: M2.5 (P=0.45)×5), standard contact point No.901312
